Threaded rod cutter - 586/6

	made from special forged tool steel, fitted with exchangeable jaws that smoothly cut even the toughest threaded rods up to class 8,8
	the cutter jaws are extra hardened and tempered for enhanced durability
	the lever handle has suitable length to allow quick and uniform cutting, therefore less force is needed to cut the threaded rods
	the tool handles are made of powder coated steel tubes and fitted with plastic sleeves for a comfortable grip
	Advantages:
	capable to cut threaded rods of three different dimensions
	clean cutting – no burring on the threaded rod
	Preservation of the thread of the threaded rod
	protected against corrosion
	easy to operate with and comfortable handling
	precise and fast cutting of threaded rods
	proper opening of the cutter
	to operate correctly, the cutter should be opened by raising the top lever handle to its maximum extent. When it is fully open, insert the threaded rod into the cutter opening of the corresponding dimension
	Cutting threaded rods
	1. Insert the threaded rod into the opening of the corresponding dimension.
	2. The threaded rod should fit tightly into the cutter thread.
	Important notes when cutting
	1. When operating on the floor, apply foot pressure on the bracket.
	2. The cutter (code 620256) is designed to cut only M8, M10, M12 threaded rods, code 621479 cut M6, M8, M10.
	3. The cutter is not designed to cut hardened threaded rods or bolts.
	4. When the cutters are worn out, always replace both cutter jaws.
	possibility of replacement of damaged cutter jaws
	cutter jaw material: special tool steel
	cutting of M8, M10, M12 threaded rods (code 620256), M6, M8, M10 (code 621479)
	clean cut, free of burrs
	preservation of threads
	simple operation
	Caution!
	prior to operation, read the instructions
	when operating, always use appropriate protective equipment
	drop forged, entirely hardened and tempered