Više o proizvodu

Profili

Proizvod je izrađen prema VDE standardimaProfil odvijača, pljosnatipremijum hard hrom-vanadijum čelikTrajna garancija

Srtandardi

DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

Opis proizvoda

  • vrh i stablo od hrom-vanadijum-molibdena, kaljen i ojačan
  • vrh bruniran
  • ručka ergonomski oblikovana
  • ručica od trokomponentnog materijala
  • otvor u dršci za kačenje
  • izrađen prema standardu DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

Prednosti:

  • model sa tankim (SLIM) stablom
  • bez obzira na tanko (SLIM) stablo, odvijač obezbeđuje istu funkcionalnost i sigurnost tokom rada kao i standardni odvijač.
  • tanko (SLIM) stablo omogućava rad na teško dostupnim mestima
#title#
KodDebljina x širinaDodatna dužinaDužinaTežina
6240630.6 x 3.510018537
6240640.8 x 4.010018539
6240651.0 x 5.512522574
* Fotografije proizvoda su simbolične. Sve dimenzije su u mm, a težina u gramima. Sve navedene dimenzije mogu odstupati u granicama tolerancija.

Upotreba (slike)

Ergonomski dizajnirana drška štiti vašu ruku

Velika kontaktna površina = veći obrtni moment

Pravilna upotreba

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
  • VDE tools that have several parts, have to be assembled correctly before use.
  • When working with VDE tools avoid contact with water.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Don't use tools that shows sign of wear and have the second layer of plastic visible.
  • Ultimativna zaštita

    Uniorovi izolovani VDE alati obezbeđuju maksimalnu zaštitu čak i kada se koriste oko strujnih kola do napona od 1.000V. Korisnost svih alata je potpuno potvrđena putem testova udarne snage, elektriciteta, otpornosti na plamen i adhezivne izolacije, kojim je svaki pojedinačni alat posebno testiran.
  • Čelik vrhunskog kvaliteta

    Izolovani ključevi, klešta, makaze, odvijači i drugi alati za rad pod naponom izrađeni su od visokokvalitetnog alatnog čelika, sa dodatnom zaštitom i dizajnirani su za jednostavnu i bezbednu upotrebu.
  • VDE propisi

    VDE izolovan i testiran prema VDE propisima, Uniorov alat za rad pod naponom zadovoljava zahteve međunarodno priznatog evropskog EN 60900 standarda.